




Mast tip ponch from Stephen Gibson on Vimeo.
.............but not so perfect for our carve gybe clinic! In the end, it worked perfectly as an introduction to wavesailing for Stephen, who quickly got to grips with the conditions (amazingly so as he had never sailed in waves before and the conditions were tricky to say the least), growing noticeably in confidence over the next few days.
To cap off a fantasic week he sailed out of his first ever planing carve gybe on the last day and did his first (pretty high) chophop! I´d say he´s still smiling now, back in rainy Ireland, haha!
As I may have already mentioned, Oisin is busy at home now editing the hours of footage we got using the GoPro HeroCam. In the meantime, here is a short clip to give you an idea................................
First day of one handed attempts....... from Stephen Gibson on Vimeo.
Katie McAnena looping in Fuerte! from Katie McAnena on Vimeo.
The same week, I had my good friend Kev Bambra over from the UK. We had some pretty good conditions for the whole week (see Katie's vid!) and Kev was in pieces by the end, haha, check out his hands in this photo!!!!!!!! Kev is a drummer with up-and-coming new hardcore band Faceshredder and garage punk legends The Coyote Men and has a busy schedule of gigs when he gets back home- ouch!!!!!!!!!
On the topic of injuries, my good friend, young shredder Stefan Ploum (Kauli), who has been on the island since February honing his skills (and improving very quickly, incidentally), broke his foot in two places a couple of days ago crashing a big forward and will now have to return home to his native Holland for an operation,cutting short his stay by six weeks or so and missing the summer trades. Bummer. He'll be back soon, though, and hopefully he'll have a video for me to post up soon (he's got alot of time on his hands now!). Best of luck, mate, see you soon.........
Grubby Diablo from Stephen Gibson on Vimeo.
Double Flaka from Stephen Gibson on Vimeo.
PROBABLY THE BEST SIGNPOST IN THE WORLD.
Get High Or Die!!!!!!!! from Stephen Gibson on Vimeo.
Double flaka session!!!!! from Stephen Gibson on Vimeo.
Helmet cam trial run from Stephen Gibson on Vimeo.
Here it is - the moment we've all been waiting for!Well, me anyway........As promised, here is a bit of footage using the latest in modern technology- the home-made helmet cam!!!! Comprising of a combination of a video camera, a helmet, some roofrack straps and a lot of little fiddly bits, the home-made helmet cam may look a little awkward to manipulate but it surpassed even our expectations- it is also heavy, unpredictable and, almost certainly, dangerous! That said, however, we got some pretty nice stuff on there in the 30 minutes we had before Victor's(cameraman) neck swelled up. Enjoy the video....................Stephen.
One-handed flaka from Stephen Gibson on Vimeo.
Had a couple of decent sessions at Punta over the last couple of days and managed to persuade my amigo Victor to video for 20 minutes. I concentrated on flaka variations this time, so I can add to my ever-expanding tricktionary! Here is the first variation- the one-hander. I will do a step-by step very soon, and post the other two variations I got on video over the next couple of days.
We also did some filming with a "revolutionary"(i.e home-made) helmet cam yesterday morning, the video is almost finished and I will post it up very,very soon. Watch this space............
Ponch from Stephen Gibson on Vimeo.
Although you can ponch off anything once you have them dialled, I found it easiest to learn them going out with a small wave.
Fully powered up, spot your ramp downwind and bear off until the sail becomes weghtless.
Hit the wave as broad as possible(almost a dead run), and, as the board leaves the water,throw the rig down and to windward.
Look over your front shoulder back toward the direction you just came from, this will make the board follow the sail in it's rotation.Timing is critical here-if you throw the sail too early, your feet will come out the straps and it will be messy!
Straighten your arms to distance yourself from the sail.
The board should come down tail first now,bend your knees and drag the sail forward towards the nose of the board.You've done your first ponch.Easy!
Flaka from Stephen Gibson on Vimeo.
Sail on a broad reach at full velocity.
Spot a piece of chop and, moving onto the balls of your feet, bear away even more and flatten the board off as you hit the chop and pop the board out of the water.
This is the moment when flaka success or failure is decided. As the board leaves the water, you must lean forward towards the nose of the board as far as possible, bending slightly at the waist to get your head above the mastfoot. At this point you must also look upwind over your shoulder to encourage the board to rotate into wind. Also, you should throw the sail as far forward as possible with your front arm straight and your back arm bent in real close to the body, keeping the sail neutral(no pressure in the back hand). Tricky,eh? There is alot going on in this first nanosecond but if you can get all these factors to converge in this first moment, the rest is easy.
The nose of the board should stick in the water and spin you backwards. Keep leaning forward with your front arm straight and your back arm bent into the body, and the board will automatically spin itself back onto the original tack.
Flakas can take a bit of time to lear, esoecially for older sailors like myself, as the forward, into-wind movement during the pop is so unnatural.Patience is required..............
Grubby from Stephen Gibson on Vimeo.
Taking good speed from a beam reach start bearing away.
Coming onto a broad reach KEEP OVER THE BOARD and get ready to POP by sinking down through a bent back leg.
POP the board and you are aiming to throw the tail as far downwind as possible. TIP: look at mastfoot to KEEP YOU OVER THE BOARD.
Stay over the board and keep pulling back leg up under you and this drops nose to offer a sliding surface you can pivot around.
Still focused on the mastfoot, and OVER THE BOARD, you are landing and keeping the weight over your front foot and your toeside.
After the initial sheeting in you now have to extend the back arm and sheet the sail right out whilst keeping your weight over your front foot and your toeside. The tail is now as far downwind as possible and you should be sliding backwards. WEIGHT FORWARD AND BACK ARM EXTENDED.
Continue extending and sliding and your weight will slowly be transferring over your heelside. The nose is now starting to come through the eye of the wind. Looking through the sail may help orientate you, whilst it also maintains WEIGHT FORWARD.
Nose is now through wind so you will be exiting by sheeting in and continued weight transference to heelside. TIP: Look behind you to assist sheeting in and to bring weight outboards.
Board is now almost across wind and sail is sheeting in as body moves outboard. Weight is fully over heels as you as sinking down to resist sail power.
Claim it, or go into a gybe to do 540 and sail off......................
Spock 540 from Stephen Gibson on Vimeo.
Head a little off the wind and pop the board into a vulcan.As you land, your weight should be COMPLETELY on the front foot, with your upper body leaning forward towards the nose of the board.This is super important to aid the slide.
Upon landing,look over your back shoulder(in the direction of the slide).This will twist the shoulders and the hips and force the board to rotate instead of just slide in a straight line.
Grab the boom on the new side(your front hand will have changed during the pop)and move your (new)back hand towards the clew to increase control over the sail.
As the board begins to spin, move your body weight onto your heels. At this point there will be very little pressure in the sail.
As the board spins to the new tack,push on the sail with the backhand and flip it through the wind(learning heli tacks will help you alot here). You should now be sailing away clew-first on your original course and can bend the knees allowing the board to rotate the last 180.Smile at the camera and sail off.............
Shaka from Stephen Gibson on Vimeo.
I love doing shakas! This is my technique for doing them(off a wave).
Approach the wave on a broad reach, with as much speed as possible.
As you reach the wave, bend your knees and start the carve into wind. You should be carving pretty hard as you take off from the lip.
As you take off, lay the sail down as for a shuvit, keep sheeted in hard with the back hand, and lean the upper body forward towards the nose of the board. Do NOT lean back!
In the air, keep the front arm straight and use the back hand to feather the sail and control the rotation.
Keep leaning forward throughout to encourage a nose-first landing.
As you land, keep the front arm extended forward, push the clew through the wind and you're outta there, job done!
Forward loop from Stephen Gibson on Vimeo.
Try and find a bit of chop or a wave, say 15 metres ahead of you, in other words pick your jump. Head slightly downwind and now place your hand at the rear of the boom, the further back the better when you are learning. Jump off your chosen bit of chop and turn your board downwind, you do this by lifting your rear foot under your bum and sheet in hard whilst looking towards the clew of your sail.
Whatever you do NEVER look straight ahead or down at the water when your doing a loop always look back over your back shoulder as far as you possibly can.
Keep sheeting in hard, even just by holding this position you will rotate a certain amount. You can tell just how far you have rotated by looking at the clew of your sail. It’s very important to not sheet out or let go of the boom with your back hand at this stage as you will probably be in for a hard crash.
Initially you will land on your back, but over time and with practice you will get a feel of what a loop feels like and will develop your own technique.
Good luck..................
One-Handed Flaka Diablo from Stephen Gibson on Vimeo.
Yep, we're blatantly just showing off now!
Start as you would for a one-handed flaka, and, as the board is sliding backwards, go into your diablo.
There are two ways of doing this; first way is to put your front hand back on the boom in the normal position, wait for the rotation to begin and then move it to the back of the boom and do your diablo. The other, flasher way is to leave your front hand off completely until the board starts it's rotation and then grab the end of the boom directly. This second method looks way better and is just as easy, but requires more speed than the first.
Easy??!!!??